Sale!

Ecler DAM514

788  360  EX. VAT

Categories: , Tags: , ,

Digital audio mixer, 5 in, 4 out, DSP

3 in stock

Description

NEW WITH FULL WARRANTY
CASH & CARRY, TRANSPORT IS NOT INCLUDED.

Ecler DAM514

Digital audio mixer, 5 in, 4 out, DSP

  • 3 stereo LINE inputs, RCA terminals
  • 2 MIC/LINE inputs, balanced, Euroblock terminals. Can be configured to work independently (mono) or linked to become a 4th stereo input
  • 4 balanced audio outputs, Euroblock terminals: each output can work in single mode (mono zone) or linked with another output to become a stereo zone (1&2 / 3&4 couples)
  • DSP @ 24 bits / 48kHz
  • Front panel LCD display, 2×20 characters
  • 4 front panel configuration keys + digital encoder, for parameters adjustment and menus navigation
  • 1 backlit control key (MUTE, selection or configuration functions) for each input and output (9 keys in total)
  • 4 REMOTE ports (0-10 VDC), ready for inputs or outputs volume control, source selection, presets recovery, etc., using WPm series wall panels
  • PAGER port for real-time voice paging, using an MPAGE4 console unit
  • MUTE port for one or several zones muting via external contact closure
  • RS-232 Interface with EclerCOMM free application and CA-NET protocol compatibility
INPUT 1, 2, 3 (LINE)
Sensitivity 0 / -6dBV Internal jumper adjust. 0dBV factory default
Input impedance >13k
Input connector RCA female
INPUT 4, 5 (MIC)
Sensitivity -20 / -50dBV External potentiometer adjust
Input impedance >24k electronically balanced
CMRR >55dB (20Hz ÷ 20kHz)
Input connector Terminal block (Symmetrical)
INPUT 4, 5 (LINE)
Sensitivity  0 / -6dBV Internal jumper adjust. 0dBV factory default
Input impedance >24k electronically balanced
CMRR >55dB (20Hz ÷ 20kHz)
Input connector Terminal block (Symmetrical)
ZONE OUTPUTS
Nominal output level 0dBV
Output impedance 300W electronically balanced
Output connector Terminal block (Symmetrical)
A/D & D/A 24bit / 48kHz
FREQUENCY RESPONSE <10Hz ~ 20kHz (+0dB/ -0.5dB)
OUTPUT NOISE FLOOR (FFT) >110dB (from 20Hz to 20kHz)
THD + NOISE < 0.0058% (1kHz, 1Vrms)
CROSSTALK >90dB, 20Hz ÷ 20kHz
INPUT EQ
Type Baxandall 3 ways EQ
Gain -10dB ~ +10dB in 0.1dB steps
Frequency Low 200Hz
Mid 1kHz
High 6.3kHz
ZONE OUTPUT EQ
Type 10 band EQ
Filters Adaptable Q to achieve maximum flat response
Gain -10dB ~ +10dB step 0.1dB
Frequencies 31, 63, 125, 250, 500, 1k, 2k, 4k, 8k, 16k Hz
OUTPUT CROSSOVER FILTERS
Type Low & High Pass Butterworth 12 dB/oc
Frequency 20Hz ÷ 20kHz
INPUT 4, 5 TALKOVER
Type Assignable to any output zone. 2 priority levels.
Modes Ducker / Pager (only input 5)
Threshold -80 / +12dBV
Depth 0 ~ 80dB
Attack time 5 ~ 2000ms
Hold Time 10 ~ 3000ms
Release time 50 ~ 3000ms
Chime (only input 5) ON / OFF. Variable volume. Two different melodies
INPUT 4, 5 NOISE GATE
Threshold -80 / +12dBV
Depth 0 ~ 80dB
Attack time 0.1 ~ 500ms
Hold Time 10 ~ 3000ms
Release time 10 ~ 1000ms
INPUT 4, 5 OTHER OPTIONS
Feedback suppressor Frequency shifter type
High pass filter (hum & pop suppressor) 50 ~ 150 Hz 12dB/oct Butterworth
EXTERNAL MUTE
Configuration Normally open. Assignable to any output zone
REMOTE CONTROLS
Remote type WPmVOL-SR. Up to 4 remotes
Configuration Input volume
Zone volume
Input selector
Preset selector
GENERAL
Mains 90÷264VAC 50/60Hz
Power consumption 25VA
Dimensions WxHxD 482.6x44x120mm
Weight 1.75kg