Beschrijving
NEW WITH FULL WARRANTY
CASH & CARRY, TRANSPORT IS NOT INCLUDED.
Ecler DAM514
Digital audio mixer, 5 in, 4 out, DSP
- 3 stereo LINE inputs, RCA terminals
- 2 MIC/LINE inputs, balanced, Euroblock terminals. Can be configured to work independently (mono) or linked to become a 4th stereo input
- 4 balanced audio outputs, Euroblock terminals: each output can work in single mode (mono zone) or linked with another output to become a stereo zone (1&2 / 3&4 couples)
- DSP @ 24 bits / 48kHz
- Front panel LCD display, 2×20 characters
- 4 front panel configuration keys + digital encoder, for parameters adjustment and menus navigation
- 1 backlit control key (MUTE, selection or configuration functions) for each input and output (9 keys in total)
- 4 REMOTE ports (0-10 VDC), ready for inputs or outputs volume control, source selection, presets recovery, etc., using WPm series wall panels
- PAGER port for real-time voice paging, using an MPAGE4 console unit
- MUTE port for one or several zones muting via external contact closure
- RS-232 Interface with EclerCOMM free application and CA-NET protocol compatibility
INPUT 1, 2, 3 (LINE) | |
Sensitivity | 0 / -6dBV Internal jumper adjust. 0dBV factory default |
Input impedance | >13k |
Input connector | RCA female |
INPUT 4, 5 (MIC) | |
Sensitivity | -20 / -50dBV External potentiometer adjust |
Input impedance | >24k electronically balanced |
CMRR | >55dB (20Hz ÷ 20kHz) |
Input connector | Terminal block (Symmetrical) |
INPUT 4, 5 (LINE) | |
Sensitivity | 0 / -6dBV Internal jumper adjust. 0dBV factory default |
Input impedance | >24k electronically balanced |
CMRR | >55dB (20Hz ÷ 20kHz) |
Input connector | Terminal block (Symmetrical) |
ZONE OUTPUTS | |
Nominal output level | 0dBV |
Output impedance | 300W electronically balanced |
Output connector | Terminal block (Symmetrical) |
A/D & D/A | 24bit / 48kHz |
FREQUENCY RESPONSE | <10Hz ~ 20kHz (+0dB/ -0.5dB) |
OUTPUT NOISE FLOOR (FFT) | >110dB (from 20Hz to 20kHz) |
THD + NOISE | < 0.0058% (1kHz, 1Vrms) |
CROSSTALK | >90dB, 20Hz ÷ 20kHz |
INPUT EQ | |
Type | Baxandall 3 ways EQ |
Gain | -10dB ~ +10dB in 0.1dB steps |
Frequency | Low 200Hz Mid 1kHz High 6.3kHz |
ZONE OUTPUT EQ | |
Type | 10 band EQ |
Filters | Adaptable Q to achieve maximum flat response |
Gain | -10dB ~ +10dB step 0.1dB |
Frequencies | 31, 63, 125, 250, 500, 1k, 2k, 4k, 8k, 16k Hz |
OUTPUT CROSSOVER FILTERS | |
Type | Low & High Pass Butterworth 12 dB/oc |
Frequency | 20Hz ÷ 20kHz |
INPUT 4, 5 TALKOVER | |
Type | Assignable to any output zone. 2 priority levels. |
Modes | Ducker / Pager (only input 5) |
Threshold | -80 / +12dBV |
Depth | 0 ~ 80dB |
Attack time | 5 ~ 2000ms |
Hold Time | 10 ~ 3000ms |
Release time | 50 ~ 3000ms |
Chime (only input 5) | ON / OFF. Variable volume. Two different melodies |
INPUT 4, 5 NOISE GATE | |
Threshold | -80 / +12dBV |
Depth | 0 ~ 80dB |
Attack time | 0.1 ~ 500ms |
Hold Time | 10 ~ 3000ms |
Release time | 10 ~ 1000ms |
INPUT 4, 5 OTHER OPTIONS | |
Feedback suppressor | Frequency shifter type |
High pass filter (hum & pop suppressor) | 50 ~ 150 Hz 12dB/oct Butterworth |
EXTERNAL MUTE | |
Configuration | Normally open. Assignable to any output zone |
REMOTE CONTROLS | |
Remote type | WPmVOL-SR. Up to 4 remotes |
Configuration | Input volume Zone volume Input selector Preset selector |
GENERAL | |
Mains | 90÷264VAC 50/60Hz |
Power consumption | 25VA |
Dimensions WxHxD | 482.6x44x120mm |
Weight | 1.75kg |